Polk Audio Legend L900 Pair
Polk Audio Legend L900 Pair 3d Premium Height Module Speaker
- Height-channel Atmos/DTS:X/IMAX modules: Designed specifically for Polk Legend L600 or L800 towers, you install one module atop each tower to enable immersive 3D audio
- Flush-mount design: Goes neatly into the top cavity of compatible towers—minimal diffraction, clean look .
- Horizontal driver layout: Ensures tweeter and woofer are time- and phase-aligned, creating a wide “sweet spot” in your room
- Immersive Atmos effect: Flush-mounted, timbre-matched setup produces convincing overhead imaging—many reviewers note notably wider and more cohesive soundscape when installed
- Easy integration: Phoenix connectors and included installation tool streamline setup—wiring hides inside tower cabinets
0.75″ Pinnacle ring-radiator tweeter & 4″ Turbine Cone mid/woofer
90 Hz–40 kHz (–3 dB); extended response to 30 kHz
~2 kHz 2‑way
86 dB (1 W/1 m)
Nominal 4 Ω (2.8–4 Ω range)
30–100 W RMS per module; peak 100 W
Sealed (integrates into tower for acoustic rigidity)
Phoenix speaker-level connector to height outputs on an Atmos-capable AVR
9.84″ H × 7.01″ W × 3.3″ D (25 × 17.8 × 8.4 cm)
3.3 lb (1.5 kg) each
Horizontal orientation for better performance
The Legend L900 Height Module is Dolby Atmos certified and designed to meet DTS:X specification. Traditional height speakers and toppers orient their tweeter and woofer vertically, resulting in a small “sweet spot” and can leave you underwhelmed. The L900 Height Module’s horizontal orientation ensures both the phase and time alignment for the tweeter and the woofer deliver a large “sweet spot” for a truly immersive experience.
SEAMLESS INTEGRATION, PREMIUM AUDIO
Timbre matched for unmatched performance
Designed with the same driver components of the Legend bookshelf, center and floor standing speakers so you can mix and match to create the ultimate home theater.
.75 inch Pinnacle ring radiator tweeter
Timbre-matched to the Legend floor standing speakers, the Pinnacle ring radiator tweeter is horn loaded to maximize high frequency response and to create that immersive experience
New 4 inch turbine cone
Utilizing the same Turbine Cone as Legend floor standing speakers, the height module is timbre-matched and positioned within the array to deliver the most immersive Dolby Atmos, DTS:X and IMAX Enhanced experience
You may also like
